Test Center Facilities
Artificial Rain Test Room
Construction specification for an artificial rain test zone, covering clear height, waterproofing of the roof and walls, seepage drainage with a ring drainage channel, mains water supply and 6 m³/h drainage, plus an anti-static control room with suspended ceiling, lighting and air conditioning.
Overview
Construction specification for an artificial rain test zone, covering clear height, waterproofing of the roof and walls, seepage drainage with a ring drainage channel, mains water supply and 6 m³/h drainage, plus an anti-static control room with suspended ceiling, lighting and air conditioning.
Standards & Compliance
Benchmark standards for this equipment category
Systems in this category are commonly specified against these standards, linked to the issuing body. Final configuration and acceptance criteria follow the standard and edition you nominate.
- IEC 61010 — Safety requirements for electrical measuring equipment
- IEC 60060-2 — High-voltage test techniques - Measuring systems
- IEC 60270 — Partial discharge measurements
- GB/T 16927.1 — High-voltage test techniques
Application Scenarios
Request Specifications & Quotation
Tell us your test object ratings, the test items you need and the applicable standards. Our sales engineers reply with a configuration proposal and a formal quotation within 24 hours.
Get a QuoteDetailed Description
Rain test zone construction requirements: the rain test zone is located on the south side of the test centre. The internal clear height is not less than 4.5 m and the exterior wall height matches the shielded room height of 5 m. The top surface of the rain zone and the four surrounding walls require waterproofing treatment, the floor requires seepage drainage treatment, and a ring drainage channel is provided.
Waterproof lighting has to be taken into account. The room requires a water supply from the mains and drainage rated at 6 m³/h.
Control room: an anti-static floor is installed, and once installed it is level with the test hall floor elevation.
The control room interior requires a suspended ceiling, together with lighting and air conditioning.
Technical Specifications
| Internal clear height | Not less than 4.5 m |
|---|---|
| Exterior wall height | Matching the shielded room height (5 m) |
| Waterproofing | Top surface and four surrounding walls |
| Floor treatment | Seepage drainage treatment with a ring drainage channel |
| Lighting | Waterproof lighting |
| Water supply | Mains (tap) water |
| Drainage capacity | 6 m³/h |
| Control room floor | Anti-static floor, finished level with the test hall floor |
| Control room fit-out | Suspended ceiling, lighting facilities and air conditioning |
Frequently Asked Questions
What are the dimensional requirements for the rain test zone?
How are water supply and drainage handled?
What is included in the control room?
Reviewed by the Application Engineering Team at Nanjing Gaodian Electric Power Equipment
Specifications are taken from the manufacturer’s technical documentation. Final configuration and acceptance criteria follow the standard and edition you nominate — tell us your test list and we will confirm the ratings.
Related Products
HV Test Center Central Control Room
Build specification for the central control room and machine room of a high-voltage test centre. Covers clear height, anti-static raised flooring with a minimum 100 mm void, reserved cable penetrations, glass curtain wall and air conditioning to a constant 20 ±5 ℃.
ECBZ-GD Energy-Efficient Transformer Energy-Grade Evaluation System
Automatic evaluation system for the energy-efficiency grade of distribution transformers up to 800 kVA at 10 kV/0.4 kV. Combines intelligent test sequence control, automatic wiring changeover, data processing, data upload and report generation in one bench.
EMC Shielded Room for PD Testing
Modular bolted shielded enclosure built from 2 mm galvanised steel module plates with conductive gasketing, honeycomb waveguide ventilation, filtered power, dedicated grounding below 0.5 Ω and a double-glazed shielded observation window. Shielding effectiveness is 60 dB or better from 0.5 MHz to 1.6 MHz.
GD230 Ground Continuity Tester
Portable instrument for measuring the continuity resistance between the grounding down conductors of individual items of equipment in a substation. Controlled by a high-performance MCU with automatic current selection, on-board data retention and a thermal printer.
GD-300D Reactor Electrical Parameter Tester (Portable)
Portable instrument dedicated to measuring the electrical parameters of single-phase and three-phase reactors, including AC phase voltage RMS, average voltage, current RMS, active power, reactance and inductance, at 0.5 class accuracy.
GD-300D Reactor Electrical Parameter Tester (Built-in)
Panel-mounted version of the GD-300D reactor electrical parameter tester, using a 320 x 240 dot-matrix LCD with multi-screen menu operation and direct measurement of three-phase reactance, inductance and total active power.
More in Test Center Facilities
Need the datasheet for this model?
Send us this product name plus your test requirements. We reply with specifications, photos and a formal quotation.